The Backsaver ST Standard tipping machine is designed to empty large plastic bins, tubs or crates at a work table height.

Specifications of this standard model;

• Standard ST model
• Battery operated (incl. charger)
• Lifts up to 900KG (2000Lbs)
• Discharge angle 100⁰
• Discharge height 1060mm (at 100⁰)
• Chute tapered instead of straight. (550mm)

For any questions, feel free to contact us!

Currently in stock after an exhibition Zwaarlast kieper / kantelaar 1000

For container width 1000mm, max 1000kg.

Battery powered, stepless hold-to-run operation.

• Battery operated (including external charger)
• Completely stainless steel AISI304, glass-beaded
• Heavy-duty locking casters
• Independent controls on each side
• Dead man’s (hold-to-run) buttons (Up/Down)

Currently 1 in stock in our warehouse in Sweden, the pneumatic dual trolley washing station.

Completely equiped with standard:

• Cylinder cover
• Rubber lowering damper
• Flexible sives

Swedish compact mobile trolley dumper.

Discharge at table height, or for tipping onto surfaces such as conveyor belts.

The Backsaver ST Standard tipping machine is designed to empty large plastic bins, tubs or crates at a work table height.

Specifications of this standard model;

• Standard ST model
• Battery operated (incl. charger)
• Lifts up to 900KG (2000Lbs)
• Discharge angle 100⁰
• Discharge height 965mm (at 100⁰)
• Chute & stopper can be adjusted to certain width/height.

The Backsaver LT lifting/tipping machine is designed to empty large bins when the Backsaver ST tipper’s dumping height is insufficient. The LT machine is equipped with a van Oirschot specialty lift-and-tip system that makes it possible to raise a large, heavy bin to a certain height and then tilt it. It’s a compact solution for major tasks. It’s also ideal for use at different locations or for installation at a specific, traffic-heavy location.

Avaliable with different chute configurations.

Specifications of this standard model;

• Standard LT model
• Battery operated (incl. charger)
• Lifts up to 900KG (2000Lbs)
• Discharge angle 100⁰
• Discharge height 1235mm (at 100⁰)
• Chute & stopper can be adjusted to certain width/height.

Adjustable discharge height of 1.600 – 2.200mm in 50mm steps.

Maximum angle 135 degrees.

Suitable for 200- and 300L meat buggies DIN9797.

Completely stainless steel.

More info to be read at https://www.backsaver.nl/products/c3/ and https://www.nimo-kg.se/en/produktkategori/lifting-and-tipping-equipment/

Directly available!

A new and unused full stainless steel 304 single column lift for 200- and 300L meat carts DIN9797.

Capacity 380kg.

Adjustable discharge height 1.550mm – 2.050mm

Mains powered 400V

New and unused weighing system. Empty trolleys and see exactly how much weight has been taken out of the trolley.

Full stainless steel 304 build.

Capacity 200- and 300L meat buggies.

A few trolleys can directly be shipped from stock in Boxtel, NL. Larger stock can be shipped from Kågeröd, Sweden.

Original quality since the 1960s, full stainless steel 304 with 5mm reinforced bottom.

The Backsaver MD tipping machine is designed to empty heavy, extra-large plastic bins, combo bins, pallet crates, bulk boxes or octabins and other large containers at an angle of max. 120⁰.

Specifications of this standard model;

• Standard MD model
• Adapted to standard Dolav bins of 1200x1000x800mm
• Battery operated (incl. charger) (double batteries, 20A charger)
• Lifts up to 1200KG (2500Lbs)
• Discharge height 1200mm at 120⁰

The Backsaver PL lifting/stacking machine is designed to stack/destack standard pallets. Unlike a scissor lift, this machine can be used for both stacking and de-stacking purposes.

Specifications of this standard model;

• Standard PL model
• Battery operated (incl. charger)
• Lifts up to 900KG (2000Lbs)
• Lift height 1095mm (Top of the forks)

The Backsaver SNT lifting/stacking machine is designed for lifting standard DIN9797 200- or 300-liter meat carts, trolleys or buggies that have to be placed on shelves for storage over extended periods of cooling, pickling, hardening or ripening.

Specifications of this standard model;

• Lift height of 1800mm, capable of stacking DIN9797 200 liter buggies on 3 levels in a racking.
• Battery operated (incl. charger)
• LED flashing beacon light
• Heavy-duty locking casters
• Independent controls on each side
• Dead man’s (hold-to-run) buttons (Up/Down)